How to attach and detach the camera
●Attach
Step 1. Insert the white plug of the camera into the socket at the bottom of the drone (indicated as
Pic. 1);
Step 2. Insert the camera top cylindrical bulge into the slot at the bottom of the drone (indicated as
Pic. 2); then turn clockwise 90 degrees of the camera to confirm the camera is installed firmly
(indicated as Pic. 3).
●Detach
Step 1. Hold the camera with your thumb and index finger and then turn counter-clockwise 90 degrees
to take out the camera (indicated as Pic. 1);
Step 2. Press on the buckle and take out the plug of the camera from the socket of the drone
(indicated as Pic. 2).
pic.1 pic.2 pic.3
pic.1 pic.2
Rechargeable batteries are only to be charged under adult supervision.
Exhausted batteries are to be removed from the drone.
The supply terminals are not to be short-circuited.
The charging line to be used with the product should be regularly examined for potential
hazard, such as damage to the cable or cord, plug, enclosure of other parts and that in the
event of such damage, the product must not be used until that damage had been properly
removed.
-6-
To Next Page
Loading...
