To Next PageTo Next Page
Need help?Do you have a question about the JJRC X7 and is the answer not in the manual?
Adherence to laws, staying within sight, and avoiding obstacles are crucial for safe operation.
Fly in open areas, away from obstacles, bad weather, and signal interference.
Aircraft uses GPS for autonomous flight; altitude hold mode is used if GPS is weak or unavailable.
Automatic RTH is triggered by low battery or loss of remote signal; follow safety guidelines.
Details on low battery warning, critical low battery, and control loss RTH procedures.
Calibrate compass when changing flight sites or if abnormal behavior is detected.
Handle batteries carefully, avoid liquids, extreme temperatures, and physical damage. Use specified batteries only.
Use specific chargers, charge in ventilated areas, and disconnect after charging.
Store in dry, cool place, away from children and metal objects. Follow transport regulations.
Discharge batteries fully before recycling. Dispose according to local laws.
Avoid high/low temperatures, overload, and long idle periods. Recharge every 3 months.
Discharge battery to 5% before boarding an airplane. Store in a ventilated, dry place.
Identifies key aircraft parts including motors, camera, battery, and indicator lights.
Explains the meaning of different light signals on the aircraft.
Identifies and describes the functions of buttons and components on the remote controller.
Explains the power indicator light status during charging and operation.
Details the meaning of the mode indicator light for GPS and Altitude hold modes.
Instructions on how to download the JJRC mobile application via QR code.
Detailed steps for charging the aircraft battery using the provided charger and USB adapter.
Steps to prepare the remote controller, including mounting phone and charging its battery.
Instructions for inserting a TF card into the aircraft's card slot, with a caution.
Detailed steps for correctly installing propellers on motor arms A and B.
Instructions on how to insert and remove the aircraft's battery from the compartment.
Steps to properly power on the aircraft for flight.
Procedure for aircraft self-inspection and successful pairing with the remote controller.
Steps to connect the aircraft to the mobile app via Wi-Fi, checking GPS signal status.
Manual and one-key takeoff procedures for the aircraft.
Manual and one-key landing procedures for the aircraft.
Explanation of control inputs for Mode 1 and Mode 2 joystick configurations.
Instructions on how to switch between control modes (Mode 1 and Mode 2).
How to use the 'Photo/Video' button to take photos and record videos.
Details on entering and using Position Hold mode for stable flight with GPS.
Instructions for Altitude Hold mode, requiring experienced operation and caution.
How to initiate RTH, control landing, and exit the auto-return mode.
Procedure for safely turning off the aircraft and remote controller after flight.
Steps for removing batteries and storing them safely and separately.
Instructions for pairing a new remote controller with the aircraft.
Steps to power on the aircraft for flight using the mobile application.
Guide to connecting the aircraft to the mobile app for flight control and monitoring.
How to select control modes (e.g., Mode 2) within the mobile application settings.
Explanation of the default Position Hold mode and its activation based on GPS signal.
Procedures for manual and one-key takeoff and landing using the mobile app interface.
Detailed controls for joystick operation in Mode 1 and Mode 2, including direction and rotation.
Instructions for using the phone's gravity sensor to control aircraft movement.
Aircraft circles a defined subject, allowing radius adjustment for unique shots.
Aircraft automatically follows your mobile device, requiring good GPS signal.
Guide to setting waypoints, altitude, and executing automated flight paths.
General
