09:5 9
WLAN
Drone
- xxxxxx
CHOOSE A NETWORK...
19
X7
Operation Manual
(1) Turn on aircraft.
(2) Rapidly and continuously press the aircraft power button for 4 times until the aircraft’s rear indicator light turns double-ashing
blue, indicating the aircraft has been ready for pairing.
(3) Press the "Photo/ Video" button and long press the power button for 2 seconds at the same time. Wait until the controller’s two
indicator lights turn ashing green, indicating the remote controller is ready for pairing.
(4) With the aircraft’s rear indicator light turns from ashing green to sold, the pairing has been successful.
IX. Flying with the APP
1. Power on
(1) Insert the battery into the battery compartment.
(2) Put the aircraft on the flat surface and long press the power
button for 2 seconds to switch on the aircraft.
Power on the aircraft and put the aircraft on at ground for
over 30 seconds for self-inspection. When the aircraft's indicator
light turns ashing blue, the aircraft has completed self-inspection.
2. Connect with the APP
(1) Open the APP,click WLAN
setting and click "Drone-xxxxxx" to connect
Notice:The aircraft can only connect to 5G Wi-Fi enabled mobile phone.
(2) Please click to learn how to operate the aircraft before ight Click ”start ying” to enter ight interface shown as the picture
below:
To Next Page
Loading...
Need help?
General
