17
X7
Operation Manual
During the ight, you can use the "Photo/ Video" button to take image or video footages.
Short press the "Photo/ Video" button and wait until the remote controller beeps, indicating that you have successfully taken a photo.
Long press the "Photo/Video" button and wait until the remote controller beeps steadily, with the APP icon changes from white to
red, indicating it has been ready for video shooting. Long press the button again and wait until the remote controller beeps steadily,
with the APP icon changes from red to white, indicating it has stopped recording.
○ Aerial photography tips
(1) Check the condition of all parts before ight.
(2) Take photos or vides when the drone is in position hold mode.
(3) Shoot on sunny and breezy days.
(4) Slightly toggle the joystick in mid-ight as to ensure a smooth ight.
Note: In order to avoid possible damage or loss,please ensure that the camera is free to rotate. High
temperature may cause damage to the camera and even cause injury.
5. Flight mode
1) Position hold mode
○ How to enter position hold mode
a. Default ight mode is GPS mode.
b. When the drone is in altitude hold mode and the GPS positioning system is working well, long press the button on the remote
controller to switch to position hold mode.
○ Indicator light status of the aircraft and the remote controller
The left indicator light on the controller turns solid green.
○ Notice
In position hold mode, the aircraft will automatically position its own location and hover steadily. Please choose an open and wide
outdoor eld before ight, and wait until the GPS has been turned on before ying it.
2) Altitude hold mode
○ How to enter altitude hold mode
When aircraft is in position hold mode,long press mode switch button to switch to altitude hold mode.
○ Indicator light status of the aircraft and the remote controller
The left indicator light on the controller turns ashing green.
○ Notice
The aircraft in altitude hold mode requires pilots with experienced operation skills. However, certain environmental factors, such as
airow, might affect the ight, resulting in drifting or hovering failure.
Please familiarize with the position hold mode and learn how to handle it before using altitude hold.
Note: As for the return to home point as precise as possible, please fly the aircraft in open flat terrain (no tall
buildings in 50 meters of radius, flat terrain in 10 meters of radius) with the GPS working well. Thus the
return to home function will be able to activate.
6. Return to home
In GPS positioning mode, you can press the "One Key Return" button to return the aircraft. Do not control any functions during the
process of return or ascent. When the aircraft is landing, you can toggle the joystick as to control it to land on your desired location.
When the aircraft is returning to home point, long press the "Return" button to exit auto return mode.
To Next Page
Loading...
Need help?
General
