Need help?Do you have a question about the JK Audio Broadcast Host and is the answer not in the manual?
General| Frequency Response | 20 Hz - 20 kHz |
|---|---|
| Audio Inputs | 1 x XLR, 1 x 1/4" TRS |
| Audio Outputs | 1 x XLR, 1 x 1/4" TRS |
| Power Supply | 9V DC, 100mA |
| Headphone Output | 1 x 1/4" TRS |
| THD | <0.1% |
| Signal to Noise Ratio | >90dB |
| Input Connectors | XLR, 1/4" TRS |
| Output Connectors | XLR, 1/4" TRS |
Essential safety guidelines and precautions for operating the Broadcast Host safely.
Detailed explanation of the front panel controls, buttons, LEDs, and headphone jack.
Description of all input and output jacks on the Broadcast Host, including Line, Phone, Send, Caller, and Remote.
Step-by-step instructions for connecting the Broadcast Host to phone lines and audio equipment.
Technical specifications, input/output levels, frequency response, and safety/emissions compliance.
To Next Page