To Next PageTo Next Page
Need help?Do you have a question about the JL Audio 500/1 v2 and is the answer not in the manual?
General| Signal to Noise Ratio | >95 dB |
|---|---|
| RMS Power Output | 500W x 1 @ 1.5 - 4Ω |
| Total Harmonic Distortion | <0.05% |
| Input Sensitivity | 200mV - 4V |
| Dimensions | 13.4 in x 9.25 in x 2.36 in |
| Fuse Rating | 50A |
| Damping Factor | >500 |
Important warning regarding high sound pressure levels and hearing protection.
Instructions for recording and locating the amplifier's unique serial number.
Details vehicle system compatibility and usage restrictions for the amplifier.
Key considerations for a successful and safe amplifier installation.
Guidance on mounting and ventilation for optimal amplifier heat dissipation.
Essential safety precautions during amplifier installation in a vehicle.
Common installation errors that can lead to damage or hazards.
Step-by-step guide for a standard amplifier installation process.
Detailed instructions for connecting the amplifier's power supply.
Specifies fuse types and placement for safe power connection.
Explains the two methods for turning the amplifier on and off.
Details on connecting audio sources and setting input parameters.
How to connect RCA cables for audio input signals.
Selecting the appropriate input voltage range for optimal sensitivity.
How to precisely set input sensitivity for maximum clean output.
Configuration of filters, equalizer, and bass boost features.
Details on the amplifier's built-in low-pass filter functionality.
Features and configuration of the amplifier's preamp output.
Preamp output mode with an independent, active filter.
Features for optimizing bass response with EQ and infrasonic filter.
High-pass filter to remove subsonic frequencies and protect speakers.
Adjustable equalizer for fine-tuning bass frequencies and bandwidth.
Information about the amplifier's power delivery and speaker load compatibility.
How to connect speakers to the amplifier's output terminals.
Explanation of the amplifier's status indicators and protection modes.
Technical specifications for the 500/1v2 amplifier.
Detailed procedure for setting input sensitivity for optimal performance.
Charts for accurately selecting filter frequencies.
How to link multiple 500/1v2 amplifiers together.
Common issues and solutions for amplifier operation.
Troubleshooting steps for an amplifier that fails to power up.
Diagnosing and fixing sound quality issues like distortion or low volume.
Resolving intermittent output issues related to connections or mounting.
Addressing amplifier shutdown problems, often related to voltage or heat.
Steps to take when the amplifier powers on but produces no sound.
Diagram for documenting amplifier switch and control positions.
Details of the product warranty terms and conditions for USA customers.
