JLab Bouncer User Manual

Calling and Answering
You can make or receive a call via Music Link Wireless Speaker
.
Making a call
1. Make sure that your smart phone has connected to Music Link Wireless Speaker.
2. Dial a phone number, confirm to call. You can select an audio source from selections:
Music Link Wireless Speaker, your smart phone name and Speaker on your smart
phone.
3. Choose Music Link Wireless Speaker then you can start calling through Music Link
Wireless Speaker.
Answering a call
1. Make sure that your smart phone has connected to Music Link Wireless Speaker
speaker.
2. When you receive a call, press to answer. You can select an audio source from
selections: Music Link Wireless Speaker, your smart phone name and Speaker on
your smart phone.
3. Choose the Music Link Wireless Speaker and then can begin to talk through Music
Link Wireless Speaker.
Aux in Mode
You can use another audio device with your Music Link Wireless Speaker. This requires
using an audio cable with a 3.5mm plug on one end to connect with the Aux input on the Music
Link Wireless Speaker system.
4. Press / MODE to shift from BT. mode to Aux in mode.
5. Plug the cable from the audio device into the Aux connector on the back of the Music Link
Wireless Speaker.
6. To gain optimal volume levels, adjusting the output volume level on both the source
device and the Music Link Wireless Speaker itself are recommended.

JLab Bouncer Specifications

General

Brand	JLab
Model	Bouncer
Category	Speakers
Language	English