Need help?Do you have a question about the JLG 1230ES and is the answer not in the manual?
General| Platform Height | 12 ft |
|---|---|
| Platform Capacity | 500 lb |
| Working Height | 18 ft |
| Maximum Platform Height | 12 ft |
| Power Source | Electric |
| Drive Motor | 24V DC |
| Machine Width | 0.76 m |
| Battery | 24V |
| Platform Width | 0.76 m |
| Stowed Width | 0.76 m |
| Machine Length | 56 in |
| Platform Length | 44 in |
| Stowed Height | 67 in |
| Stowed Length | 56 in |
Explanation of safety symbols and definitions of DANGER, WARNING, CAUTION, NOTICE.
Covers operator training, knowledge, and workplace and machine inspection.
Critical warnings and guidelines for electrical safety and minimum approach distances.
Precautions to prevent machine tipping, focusing on ground conditions and load.
Emphasizes the importance of trained personnel and outlines required training.
Detailed checklist and steps for conducting a thorough pre-start inspection.
Step-by-step guide for performing essential daily walk-around checks.
Procedures for verifying all machine functions operate correctly before use.
Procedure for manually lowering the platform in case of power failure.
Explanation of how to operate the drive, lift, and steer functions via the joystick.
Detailed procedures and safety warnings for moving the platform up and down.
Guidelines for safely steering and driving the machine on various surfaces.
Handling operator incapacitation, platform snagging, and rescue operations.
Procedure for manually lowering the platform in case of total power failure.
Explanation, index, and troubleshooting steps for system fault codes.
To Next Page
