EasyManua.ls Logo

JLG 1500AJP User Manual

JLG 1500AJP
203 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operation and Safety Manual
ANSI
®
Original Instructions - Keep this manual with the machine at all times.
AS/NZS
GB
Boom Lift Models
1500AJP
3121734
November 5, 2018 - Rev F
To order go to Discount-Equipment.com

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the JLG 1500AJP and is the answer not in the manual?

JLG 1500AJP Specifications

General IconGeneral
BrandJLG
Model1500AJP
CategoryBoom Lifts
LanguageEnglish

Summary

SECTION 1 - SAFETY PRECAUTIONS

PRE-OPERATION REQUIREMENTS

Details operator training, knowledge, and pre-operation checks.

Common Safety Hazards

Covers trip/fall, electrocution, tipping, wind, crushing, and collision hazards.

Electrical Safety Distances

Guidelines for maintaining safe distances from electrical lines and apparatus.

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION

PERSONNEL TRAINING AND RESPONSIBILITIES

Requirements for operator training, supervision, and responsibility.

PREPARATION, INSPECTION, AND MAINTENANCE

Covers periodic machine inspections and maintenance requirements.

Pre-Start and Daily Inspections

Detailed checks to perform before starting and daily walk-around inspection.

SECTION 3 - MACHINE CONTROLS AND INDICATORS

SECTION 4 - MACHINE OPERATION

BOOM OPERATING CHARACTERISTICS AND LIMITATIONS

Key operational limits, capacities, and stability factors.

CAPACITY SELECT AND ENGINE OPERATION

Selecting capacities and procedures for engine start/shutdown.

TRAVELING (DRIVING) AND AXLE OPERATIONS

Instructions for driving, traveling on grades, and axle operations.

EMERGENCY PROCEDURES

Covers emergency towing, shutdown, parking, lifting, and tie-down.

SECTION 5 - LCD DISPLAY PANEL

Safety and System Warning Indicators

Indicators for BCS Lamp, Wire Rope Service, Platform Level, and Overload.

Chassis and System Status Indicators

Indicators for axle positions, machine tilt, and envelope status.

SECTION 6 - EMERGENCY PROCEDURES

EMERGENCY OPERATION AND RESCUE

Steps for operator incapacitation and boom/platform entanglement.

SECTION 7 - ACCESSORIES

SECTION 8 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE

INTRODUCTION AND OPERATING SPECIFICATIONS

Introduction to specifications and key operating data.

MAINTENANCE PROCEDURES

Covers lubrication, filter changes, and fluid checks.

Related product manuals