Emergency Procedures
EC450AJ, EC520AJ
31219187
87
5.5 EMERGENCY TOWING PROCEDURES
Towing this machine is prohibited, unless properly equipped. However, provisions for
moving the machine, in case of a malfunction or power failure, have been incorporated.
The following procedures are to be used ONLY for emergency movement to a suitable
maintenance area.
NOTICE
The allowable towing speed is 1.9 mph (3 km/h). The maximum allowable towing
distance is 0.6 miles (1 km).
1. Chock wheels securely.
2. Using a 3/16 inch allen wrench, remove the cap retaining screw from the hub.
3. Locate the brake release bolts in front of the hydraulic pump and remove them.
Install the cap retaining screws in the turntable in place of the brake release
screws so they are not lost.
To Next Page
Loading...
