Need help?Do you have a question about the JLG Skytrak 3013 and is the answer not in the manual?
General| Brand | JLG |
|---|---|
| Model | Skytrak 3013 |
| Category | Boom Lifts |
| Language | English |
Explains DANGER, WARNING, CAUTION signals used in the manual and on the machine.
Lists general safety rules to follow before and during machine operation.
Details safe distances and precautions when working near electrical lines or energized equipment.
Outlines causes and prevention of machine tip-overs, including load limits, tire pressure, and ground conditions.
Covers safe lifting practices, securing loads, and avoiding load drops from forks or carriage.
Specifies the use of approved platforms and safety precautions for lifting personnel.
Provides guidance for safe travel, braking, and parking on inclines to prevent tip-overs.
Warns about dangers from moving parts, rotating components, and pinch points on the telehandler.
Details safe mounting/dismounting procedures using 3-point contact and avoiding falls from the machine.
Addresses risks from exhaust fumes, flammable fuel, and hydraulic fluid, including ventilation and handling precautions.
Provides FCC information and RF exposure guidelines for the ClearSky system, if installed.
Outlines required inspections and maintenance schedules for the telehandler, emphasizing environmental impact.
Details the essential steps for a thorough pre-operation check before using the machine.
Emphasizes the importance of legible and properly placed safety decals on the machine for hazard awareness.
Provides a step-by-step guide for a visual inspection of the machine's components before operation.
Describes procedures for warming up the engine and checking operational systems for proper function.
Covers safety and integrity requirements for the telehandler's cab structure, including ROPS/FOPS.
Instructions for keeping windows clean and unobstructed for optimal visibility during operation.
Introduces the section on understanding control functions of the telehandler.
Details operation of ignition, transmission, park brake, joystick, and other essential controls.
Explains the LSI system, its indicators, and override switch functionality to prevent tip-overs.
Identifies and describes the various indicators and displays on the instrument panel for system monitoring.
Covers seat adjustments, operator presence system, and seat belt fastening for operator safety.
Explains indicators for boom angle and extension used in conjunction with capacity charts.
Covers starting, cold weather starting, battery boost, normal operation, and shutdown procedures for the engine.
Guides on lifting, transporting, and placing both non-suspended and suspended loads safely.
Details procedures for properly tying down the telehandler for safe transportation.
Provides instructions and precautions for safely lifting the telehandler itself using designated points.
Covers approved, unapproved, and non-OEM attachments, including general requirements and labeling.
Explains equivalent load calculation and how to use capacity charts, including examples for safe lifting.
Details installation for mechanical quick attach, UQC, and hydraulic attachments, including safety warnings.
Covers fork adjustment, and operation of carriage, side shift, and bucket attachments, with damage precautions.
Describes retrieval hitch connection and provides information on the ball hitch.
Provides instructions for moving the telehandler when it cannot be operated under its own power.
Outlines procedures for safely lowering the boom in case of power failure with an elevated load.
Describes how to exit the cab through the rear window in an emergency situation.
Covers introduction, safety gear, and general maintenance instructions before servicing the machine.
Details required maintenance tasks based on operating hours (8, 50, 200, 400, 600, 1000, 1500).
Provides the 50-hour lubrication schedule with diagrams illustrating lubrication points.
Covers checks for fuel, engine oil, hydraulic oil, tires, air intake, cooling, battery, brake, and washer systems.
Details the procedure for testing the Load Stability Indicator system to ensure proper functionality.
Lists required fluids, their classifications, viscosities, and ambient temperature ranges.
Specifies capacities for engine oil, fuel tank, cooling system, hydraulic system, brake system, and axles.
Provides tire specifications, pressures, and wheel lug nut torque values for safe operation.
Lists key performance data like maximum lift capacity, height, reach, and travel speed.
Details overall height, width, wheelbase, ground clearance, and weight distribution of the telehandler.
Specifies off-road and on-road towing capacities for the telehandler, noting local requirements.
To Next Page
