EasyManua.ls Logo

JLG X430AJ User Manual

JLG X430AJ
143 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operation and Safety Manual
ANSI
Original Instructions - Keep this manual with the machine at all times.
ANSI
®
Model(s)
X430AJ
3121773
June 29, 2018 - Rev C
To order go to Discount-Equipment.com

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the JLG X430AJ and is the answer not in the manual?

JLG X430AJ Specifications

General IconGeneral
Horizontal Reach22.31 ft
Weight4, 850 lb
Overall Width4.92 ft
Overall Length15.25 ft
Power SourceDC Electric
Platform Capacity500 lb
Platform Capacity - Unrestricted500 lb

Summary

Safety Precautions

Preparation and Inspection

Pre-Start Inspection Procedure

Details the specific checks required for a pre-start inspection of the machine.

Daily Walk-Around Inspection Checklist

Provides a checklist for daily walk-around inspections of machine components.

Function Check Procedure

Outlines the procedure for performing a function check of all machine systems.

Machine Controls, Indicators, and Operation

Ground Control Station Operation

Describes the controls, switches, and buttons at the ground control station.

Platform/Remote Control Station Operation

Details the controls, switches, and indicators on the platform control station.

Machine Operation

Engine Operation Procedures

Covers procedures for starting and shutting down both diesel and electric engines.

Outrigger Operation and Setup

Explains how to set and level outriggers using manual and auto modes.

Boom and Platform Operation

Covers boom and platform functions like lifting, lowering, and rotating.

Emergency Lowering Procedures

Procedures for manually lowering the platform in case of power failure.

Handling Lithium-Ion Battery Pack in Dangerous Conditions

Procedures for handling battery cells under extreme conditions like heat or explosion.

Emergency Procedures

Emergency Operation Controls

Covers emergency procedures like using the main power cut-off switch.

Operator Unable to Control Machine

Procedures for situations where the platform operator cannot control the machine.

Platform or Boom Caught Overhead

Steps to take if the platform or boom becomes snagged in overhead structures.

Manual Descent Procedures

Instructions for manual descent using platform/ground controls or hand pump.

Related product manuals