EN-8
■ Tongue Pressure Probe (Accessory)
Tongue Pressure Probe receives tongue pressure during measurement. (single use only).
■ Connecting Tube (Accessory)
Connecting Tube connects the device to the Tongue Pressure Probe. The accessory is a replacement part
which can be used for one month after opening the individual package.
Receives tongue pressure by compressing
between tongue and palate.
Material: Thermoplastic styrenic elastomer
Lightly holds the diagonal part with
the front teeth to position the balloon
on the tongue.
Grip
Holds by hand when measuring.
Tongue pressure probe connector
Screws into the connecting tube connector.
Connecting tube connector
Connects by screwing into the device and the Tongue Pressure Probe.
O-ring is installed near the tip to maintain airtightness.
Transmits the tongue pressure received by
the Tongue Pressure Probe to the device.
To Next Page
Loading...
Need help?
General