13
Joerns® Support Surfaces
P.R.O. Matt® Plus
© 2019 Joerns Healthcare • 6110394 RevB • 19-2275
System Specifications
Weight
Mattress ........................................... 24.5 lb (11 Kg)
Maximum weight capacity*: ............. 500 lb (227 Kg)
Control Unit...................................... 6 lb (2.7 Kg)
Dimensions:
Mattress
36" (91cm) W x 80" (203cm) L x 7" (18cm) D
36" (91cm) W x 84" (213cm) L x 7" (18cm) D
42" (107cm) W x 80" (203cm) L x 7" (18cm) D
Control Unit (PMP-CU)
12.4" (31.5 cm) W x 7.7" (19.5 cm) H x 4.3" (11 cm) D
Electrical Specifications
Control Unit
AC 100-240V 50/60 Hz 0.2-0.1A
Classication: Class II
Type BF
Not AP or AGP type
Fuse rating: T2AL 250V
Ingress Protection Rating: IP21
Power Cable: 15ft, non-shielding, AC powered
Environmental Conditions
Operating Conditions:
Ambient temperature: 59°F (+15°C) to 104°F (+40°C)
Relative humidity: 15-93%
Storage And Shipping Conditions:
Ambient temperature: 41°F (5ºC) to 140°F (+60ºC)
Relative humidity: 30-93%
Operation Atmospheric Pressure Range: 800 hPa to
1013 hPa
Operation Altitude: 0 to 2000 meters
Agency Approvals
Internal Fire Barrier
• Boston Fire Department BF IX-11 Mattress Fire Test
• Federal Fire Standard 16 CFR Part 1633
Control Unit
• IEC Classied: IEC 60601-1 / IEC 60601-1-2 /
IEC 60601-1-11
IEC Classication refers to the power unit only, not the
complete mattress replacement system.
Call for Assistance
If you have any questions or require service on a
Joerns product, please call Joerns Healthcare at
800.826.0270
*Mattress weight capacity only; total weight must
not exceed bed frame manufacturer’s specied
load capacity.
Key Symbols
The following symbols are used on the mattress and
control unit:
Caution, consult
accompanying
documents
Refer to Instruction
Manual/Booklet
Class II Equipment Type BF Applied Parts
Waste Disposal