Joerns P.R.O. Matt Plus User Manual

6
Joerns® Support Surfaces
P.R.O. Matt® Plus
© 2019 Joerns Healthcare • 6110394 RevB • 19-2275
Features
Mattress Features
• Four-zone (head, shoulder, torso, and foot) dynamic
pressure redistribution prole with 15 cell internal
design that automatically adjusts to each patient’s
body prole and weight (Figure 1)
• The head zone remains static and is comprised of
high density foam for maximum patient comfort while
the shoulder, torso, and foot zones are optimized
independently to maximize pressure redistribution
• Dynamic, non-powered mattress easily converts
to alternating and powered modes with connected
control unit (PMP-CU)
• Automatic re-ination of air zones through P.R.O.
Technology
®
after patient removal - no adjustment or
manual ination required
• Viscoelastic one-inch foam topper provides
maximum pressure redistribution, patient support,
and increased comfort
• Integrated foot zone helps to protect delicate
heel area
• The surrounding rm perimeter provides stability
during patient care and transfer and helps support
patient safety
• Five-inch deep internal cells are specially designed
for automatic re-ination without the use of a
powered system
• Therapy cover is constructed of a breathable,
non-plasticizing/moisture-proof nylon and aids in the
prevention of friction and shearing. Optional stretch
cover available.
• Scratch-resistant rubber backing
• Internal non-kinking hose sets
• Top cover is stain and odor resistant and is treated
with a highly e󰀨ective bacteriostatic agent to inhibit
the growth of bacteria and fungus
• Internal fully enclosed re barrier meets BFD IX-11
and 16CFR Part1633 ammability standards
• 500 lb* SWL
Control Unit Features
• Three modes of operation: Autorm, Therapy, and
Alternate
• Autorm mode provides maximum air ination
designed to assist both patients and caregivers
during patient care and transport
• Autorm safety feature automatically returns to
Therapy mode after approximately fteen minutes in
the Autorm mode
• Therapy mode is a static pressure redistribution
mode
• Alternate mode alternates the air pressure in
adjacent cells throughout the mattress (excluding the
head section)
• Four alternating pressure cycle times: 5, 10,
15, and 20 minutes
• Five Comfort Adjust settings provide the ability to
increase or decrease the general rmness of the
P.R.O. Matt Plus mattress
• Quick disconnect hoses allow easy setup and CPR
release
• Compact lightweight control unit is quiet and energy
e󰀩cient
• Crisp, easy-to-read graphics for intuitive setup and
therapy control
*Mattress weight capacity only; total weight must not exceed bed
frame manufacturer’s specied load capacity.
Figure 1

Joerns P.R.O. Matt Plus Specifications

General

Brand	Joerns
Model	P.R.O. Matt Plus
Category	Personal Care Products
Language	English