EasyManua.ls Logo

Jofemar BT-10 - User Manual

Jofemar BT-10
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MNP44GBV00 Rev.1 (01-03-2006) Page 1 of 16
Inglés
BANKNOTE READER
BT-10
User’s Manual
Jofemar

Questions and Answers

  • J
    josephayersAug 7, 2025
    What to do if banknotes are not accepted in Jofemar Industrial Equipment and status LEDs are off?
    • S
      Shannon SuarezAug 7, 2025
      If banknotes are not being accepted and the status LEDs are off, the BT10 may not have a power supply, or the power supply may be incorrect. Check that the power supply voltage is within limits.
  • J
    joshuanelsonAug 17, 2025
    Why does Jofemar BT-10 reject a banknote and the red LED blinks twice?
    • K
      Kimberly RobbinsAug 17, 2025
      If a given type of banknote is rejected and the red LED blinks twice when the banknote is rejected, it may be that the banknote is inhibited by the machine. Check that the maximum return value set in the machine is sufficient to accept the banknote and that there is sufficient change in the tubes.
  • C
    Charles MooreAug 28, 2025
    Why is only one green LED on and no banknotes accepted on my Jofemar BT-10?
    • S
      Sharon HahnAug 28, 2025
      If only one of the two green status LEDs is on and both are not blinking alternately, and no banknotes are accepted, the machine may not support an MDB banknote reader. Update the machine program.

Summary

General Description

Banknote Reader Structure

The BT10 banknote reader consists of a reading head that validates banknotes against stored patterns.

Mechanical Characteristics

Features easy access, anti-return system, escrow mode, and integrated stacker.

Dimensions

Details physical dimensions and provides a diagram for the BT10 banknote reader with stacker.

Electronic Characteristics

Covers optical sensors, magnetic sensor, MDB compatibility, and flash memory for updates.

Banknote Reader Status LEDs

Using Dip Switches

Normal MDB Operation

Configures the reader for high acceptance or high security levels using switch 4.

Tests and Programming

Enables banknote inhibition programming mode via specific switch configurations.

Technical Information

Machine Programming Options

Explains MDB protocol compatibility and required machine program modifications.

MDB Communications Connection

Details the MOLEX connector pinout for connecting the reader to the machine.

Installation Dimensions

Provides mounting hole locations and overall dimensions for machine integration.

Maintenance Procedures

Sensor Calibration

Describes recalibrating sensors using a special PC program for optimal performance.

Programming Banknote Inhibition

Covers setting which banknotes the reader should accept or reject.

Updating the Program

Procedure for updating the reader's firmware via a PC.

Updating Patterns

Process for updating banknote recognition data via PC for new or counterfeit notes.

Cleaning the Banknote Reader

Instructions for safely cleaning the reader mechanism with mild cleaning agents.

Removing Banknotes from Stacker

Step-by-step guide for accessing and removing stored banknotes from the stacker.

Troubleshooting

Jofemar BT-10 Specifications

General IconGeneral
BrandJofemar
ModelBT-10
CategoryIndustrial Equipment
LanguageEnglish

Related product manuals