60
Operation
5.5 Special functions
In this chapter all functions that may be accessed by
the operator are described. A special function is a
“mode” that is not necessarily required to balance a
wheel properly.
5.5.1 Non-skid function
On wheels with a limited weight, skid specifi cations
may make it impossible to perform a run at the normal
measuring speed.
This function may be disabled for a single run:
• Hold the START key down while the wheel guard
is lowered.
Note: the machine will start the wheel spinning
gradually in order to stop it from skidding and
avoiding the consequent error messages (E17).
.
To Next Page
Loading...
