John Bean B 100 - Mode Codes Overview; Code C0 Settings; Code C1 Settings; Code C2 Settings

66
5.7-3
5.7-4
5.7-5
5.7-6
* = Preset by the manufacturer
Operation “MODE”
Code C0
Figure 5.7-3 setting operating modes preset by the
manufacturer
0* = No action
1 = Set values preset by the manufacturer (state
1 is displayed only brie! y)
The operating mode selected can be obtained from
the permanent memory.
Code C1
Figure 5.7-4 Selecting the de" nition of the imbalance
value in steps from 1 or 5 grams (= from 0.05 to 0.25
oz.).
0* = 5 gram (0.25 oz) de" nition
1 = 1 gram (0.05 oz) de" nition
The operating mode selected can be obtained from
the permanent memory.
Code C2
Figure 5.7-5 Selecting the suppression of minor imbal-
ance values.
0* = Suppression OFF
1 = Suppression ON
The operating mode selected can be obtained from
the permanent memory.
Code C3
Figure 5.7-6 Selecting the unit of measure for indi-
cating the imbalance (grams/oz) activated after the
machine has come on.
0* = Value in grams
1 = Value in oz
The operating mode selected can be obtained from
the permanent memory.
.