HOW TO USE THE MACHINE
17
EN
5.2 WHY THE SAFETY DEVICES CUT IN
The safety devices work in two ways:
– hey prevent the engine from starting if all the safety requirements have not been
met;
– they stop the engine if even just one of the safety requirements is lacking.
a) To start the engine, it is necessary that:
– the transmission is in “neutral”;
– the blades are not engaged;
– the operator is seated or the parking brake is engaged.
b) The engine stops when:
– the operator leaves his seat when the blades are engaged;
– the operator leaves his seat when the transmission is not in “neutral”;
– the operator leaves his seat with the transmission in “neutral” but without applying
the parking brake;
– the grass-catcher is lifted or the stone-guard is removed when the blades are
engaged;
– the parking brake is engaged without disengaging the blades.
– the speed change ( 4.22) the drive pedal is activated ( 4.32) with the parking
brake on.
5.3 DIRECTIONS BEFORE STARTING WORK
Before starting to mow, it is necessary to carry out several checks and operations to
ensure you can work efficiently and in maximum safety.
5.3.1 Seat adjustment
The seat is sliding and adjustable in various
positions.
Adjustment is made by lifting the handle (1)
and sliding the seat until it is locked in the
required position.
The knob (2) can be used to adjust the posi-
tion of the backrest.
To Next Page
Loading...