john deer lr135f - Specifications

Engine ............................... B&S 21B807 - 344 cc
Nominal power ..................... 6.8 Kw / 2800 min
-1
Electrical system .......................................... 12 V
Battery ........................................................ 18 Ah
Front tires .......................................... 15 x 5.00-6
Rear tires ............................................18 x 8.50-8
Front tire pressure .....................................1.0 bar
Rear tire pressure .................................... 1.2 bar
Weight ...................................................... 186 kg
Speed:
in Forward .................................. 0 ÷ 8.8 km/h
in Reverse .................................. 0 ÷ 3.8 km/h
Inside turning circle
(minimum diameter of uncut area)
Left side.................................................. 1.6 m
Cutting height ....................................... 3 ÷ 8 cm
Cutting width ............................................ 92 cm
Grass-catcher capacity ....................... 250 liters
Stress limit on the drawbar of the towing kit
Maximum pull load ............................... 980 N
Maximum vertical load .......................... 245 N
39
EN
SPECIFICATIONS
10.
SPECIFICATIONS
1158
1795
2357
945
1113
886
959
FOR CERTIFICATE AND DECLARATION OF CONFORMITY REFER TO THE INSIDE BACK COVER!
Maximum noise and vibration levels
Operator ear noise pressure level
(according to regulation 81/1051/EEC) ............................................................ db(A) 86.02
– Measurement uncertainty (2006/42/EC) ..................................................... db(A) 0.298119
Measured acoustic output level
(according to directive 2000/14/EC, 2005/88/EC) ........................................... db(A) 99.78
– Measurement uncertainty (2006/42/EC) ...................................................... db(A) 0.278613
Guaranteed acoustic output level
(according to directive 2000/14/EC, 2005/88/EC) ........................................... db(A) 100
Vibration level
(according to the standard EN 1032) ................................................................. m/s
2
0.448
– Measurement uncertainty (2006/42/EC) ......................................................... m/s
2
0.076026