Johnson Controls Facility Explorer FX Series User Manual

Installation Instructions
Issue Date April 9, 2014
© 2014 Johnson Controls, Inc.
1
Part No. 24-10174-77, Rev. D www.johnsoncontrols.com
FX20/FX60 Supervisory Controllers
Installation Instructions
Application
The FX20 and FX60 are Web-based supervisory class
controllers in the Facility Explorer product family. The
FX20/FX60 manages networks of field controllers
using open communication protocols, such as N2,
L
ONWORKS®, and BACnet® protocols.
Figure 1: FX60 Supervisory Controller
North American Emissions Compliance
United States
This equipment has been tested and found to comply
with the limits for a Class A digital device pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference when this equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in
a residential area is likely to cause harmful
interference, in which case the user will be required to
correct the interference at his/her own expense.
Canada
This Class (A) digital apparatus meets all the
requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la Classe (A) respecte
toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
Installation
Parts Included
Unpack the FX20/FX60 and accessories
(power module, option cards), if ordered. Inspect the
contents of the packages for damaged or missing
components. If damaged, notify the appropriate carrier
and return any damaged components for repair or
replacement.
Included in this package are the following items:
 FX Supervisory Series controller
 Hardware bag containing a grounding wire with
quick disconnect 0.187 in. (4.75 mm) female
connector.
 Power module (if ordered). The power module
may be one of the following:
 LP-FXPM24-0
(24 VAC, DIN rail mountable)
 LP-FXPM263-0
(90-263 VAC, DIN rail mountable)
 LP-FXPMUS-0
(90-240 VAC, with U.S. wall adapter)
 LP-FXPMEU-0
(90-240 VAC, with European wall adapter)
 LP-FXPMUK-0
(90-240 VAC, with U.K. wall adapter)
 Communication cards (if ordered)
 LP-FXLONFTT-1
 LP-FXRS232-0
 LP-FXRS485-0
 LP-FXMDM-0
 LP-FXWTC-0
 Expansion Input/Output (NDIO) Modules
(if ordered)
 LP-FXNDIO16-0
 LP-FXNDIO34-0
 LP-FXRIO16-0

Johnson Controls Facility Explorer FX Series Specifications

General

Brand	Johnson Controls
Model	Facility Explorer FX Series
Category	Controller
Language	English