Johnson Controls IQ Panel 4 - View Edit Z-Wave Associations Process

Z-WAVE DEVICES
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 102 178
VIEW/EDIT ASSOCIATIONS
1. Select the Z-Wave device you would
like to associate with another by
touching “View”
Manually change Z-Wave associations for specific devices.
2. Select “Edit”
3. “Check” the boxes next to each
device that you would like to
associate with. Then select “Save”
Note: The IQ Panel 4 supports
Lifeline in Group 1 to send out
Device Reset Locally when it has
been associated to another Z-
Wave Plus device. This is triggered
when “REMOVE ALL DEVICES” is
used