Johnson Controls IQ Panel 4 - Scan QR Code for Sensor

SECURITY SENSORS
1. Select “Add Sensor”
2. Tap the button marked “Scan QR
Code” to open the camera. Hold
the QR code label on the sensor box
up to the camera to automatically
scan the Sensor DL ID
4. Choose Sensor Type from list
9. Click “Add New” to save the information and complete the process.
6. Choose Sensor Name from the list or create a “Custom Name” using the
built in keyboard with Custom Text to Speech.
7. Choose Chime Type from list
5. Indicate Sensor Group from list
8. Indicate whether you want Voice Prompts on or off
SCAN QR CODE
3. Use the drop down menu to select which Partition you would like the sensor
to be added to (if enabled)
*This feature is only used with Qolsys S-Line 319 Sensors that have compatible QR code labels on the box