Johnson Controls IQ Panel 4 - Panel Wiring Diagram

INSTALLING THE PANEL
WIRING DIAGRAM
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 12 178
IMPORTANT IF USING CUSTOM LENGTH
WIRE:
- 7vDC Transformer: Use 18AWG wire no
longer than 98.5ft to ensure sufficient
power is received at the panel.
* The minimum permissible wire size shall
not be smaller than 22 AWG
NOTES
7vDC* IN
GND
**WARNING! Use 7vDC**
Power Supply ONLY
7vDC* IN
BARREL JACK
BARREL JACK FOR USE
WITH SUPPLIED
BARREL CONNECTOR
CABLE ONLY. STRIPED
WIRE IS POSITIVE (+)
Input rating: 100-240vAC, 50/60Hz, 0.2A
Output rating: 7.0vDC, 1.0A
Model SW-070100AB