Need help?Do you have a question about the Johnson Controls IQ Panel 4 and is the answer not in the manual?
General| Brand | Johnson Controls |
|---|---|
| Model | IQ Panel 4 |
| Category | Security System |
| Language | English |
Lists items included in the IQ Panel 4 package.
Provides contact information for support questions and inquiries.
Outlines the scope and proprietary nature of the installation manual.
Details the components visible on the front of the IQ Panel 4.
Details the components and mounting features on the back of the IQ Panel 4.
Shows the internal components of the IQ Panel 4, including radios and battery.
Step-by-step guide for mounting the IQ Panel 4 to a wall.
Instructions for attaching the optional table stand to the IQ Panel 4.
Guide for connecting the optional IQ Base speaker to the IQ Panel 4.
Illustrates the proper wiring connections for the IQ Panel 4 power supply.
Instructions on how to power up the IQ Panel 4 correctly.
Explains how to adjust the angle of the built-in panel camera for optimal viewing.
Describes the layout and sections of the IQ Panel 4 home screen.
Explains how to access contact info, alerts, and video tutorials via the message icon.
Details how to access system settings, status, and quick controls from the top bar.
Describes the lock screen functionality for securing panel access.
Provides access to basic panel features and settings without special codes.
Access to advanced configuration options requiring installer or dealer codes.
Guides users through the panel installation and configuration process.
Initiates the Easy Setup Wizard for panel configuration based on chosen settings.
Allows customization of which pages appear during the Setup Wizard walkthrough.
Guides through the initial installation process, including dealer contact information.
Configuration options for installers and dealers, covering panel settings and protocols.
Explains how system logs are used for troubleshooting and bug identification.
Configuration for siren behavior and alarm event responses.
Settings for arming modes, entry/exit delays, and security features.
Options to enable/disable disarm photos, alarm photos, and alarm videos.
Displays detailed information for programmed Z-Wave devices.
Customization options for panel sounds, voices, and chimes.
Allows editing partition names and viewing assigned users/sensors.
Configures hardcoded automation scenes for new construction properties.
Overview of device categories like Security, Wi-Fi, Z-Wave, and Bluetooth.
Covers adding, editing, or deleting up to 128 security RF or life safety devices.
Simplifies sensor enrollment by tripping or tampering with the sensor.
Manual process for pairing sensors by entering DL code or serial number.
Uses the camera to scan sensor QR codes for automatic DL ID entry.
Assigns sensors to specific partitions for independent control.
Selects the type of security device being added or edited.
Changes sensor behavior based on predefined groups tied to sensor type.
Controls sensitivity and masks for the built-in panel motion detector.
Details scenarios and configurations for Door/Window sensors.
Details scenarios and configurations for Motion sensors.
Details scenarios for Glass Break sensors.
Details scenarios for Key Fob devices.
Details scenarios for Keypad devices.
Details scenarios for Auxiliary Pendant devices.
Details scenarios for Smoke Detector and Heat sensors.
Details scenarios for multi-sensor smoke detectors.
Details scenarios for Carbon Monoxide detectors.
Details scenarios for translator devices.
Details scenarios for Tilt sensors.
Details scenarios for Water sensors.
Details scenarios for Shock sensors.
Details scenarios for Freeze sensors.
Details scenarios for High Temperature sensors.
Details scenarios for Door Bell sensors.
Details scenarios for Siren sensors.
Details scenarios for multi-function Door/Window sensors.
Details scenarios for Occupancy sensors.
Details scenarios for Temperature sensors.
Assigns a name or custom description to a sensor for identification.
Allows users to create custom names for sensors.
Selects unique chime sounds or turns off chiming for individual sensors.
Enables or disables audible announcements for sensor events.
Indicates the incoming frequency and RF type of a paired sensor.
Modifies existing sensor settings, excluding DL or Sensor ID.
Removes sensors individually or in batches from the panel.
Monitors the real-time status of sensors like open, close, tamper, and battery level.
Provides digital access to view sensor group behaviors directly on the panel.
Connects the panel to a Wi-Fi network for software updates and dual-path connectivity.
Configures the panel's built-in router, SSID, password, and WPS.
Lists connected Wi-Fi clients with IP, MAC address, and connection duration.
Pairs up to three IQ Remote Secondary Touchscreens to the panel.
Enables or disables integration with specific third-party devices.
Step-by-step instructions for connecting the panel to a Wi-Fi network.
Adds new Z-Wave devices to the network.
Modifies settings for existing Z-Wave devices.
Removes Z-Wave devices from the network and panel.
Removes Z-Wave devices that have failed and are no longer communicating.
Resets the panel's Z-Wave controller and removes all devices.
Manually changes Z-Wave associations between devices.
Sets maximum limits for different Z-Wave device categories.
Facilitates Z-Wave device inclusion by scanning QR codes or entering DSK.
Shows the network status of devices added via SmartStart.
Details the process for including new Z-Wave devices using S2 security.
Explains how to clear a Z-Wave device from the network.
Guides on deleting Z-Wave devices that have failed communication.
Process for removing all Z-Wave devices and resetting the controller.
Manually changes Z-Wave associations for specific devices.
Pairs up to five mobile Bluetooth devices with the panel.
Modifies settings for existing Bluetooth devices, like disarm permissions.
Removes a paired Bluetooth device from the panel.
Removes all paired Bluetooth devices from the panel simultaneously.
Toggles Bluetooth on/off and adjusts disarm settings and timeouts.
Step-by-step instructions for pairing a mobile device via Bluetooth.
Allows editing Bluetooth device settings, including partition access for disarming.
Details the process for confirming and deleting a Bluetooth device.
Checks the IQ Panel 4's connection to the network router.
Displays signal strength and graphs events for each sensor.
Tests the panel's built-in cellular radio connection to Alarm.com.
Tests communication between Z-Wave devices and the panel.
Re-maps the Z-Wave network to ensure efficient communication paths.
Views which Z-Wave devices can see each other, indicating possible routes.
Provides a numerical view of Z-Wave network commands, failed vs. acknowledged.
Graphical representation of the Z-Wave network and device routes.
Accesses Network Health, Repeater, and Last Working Route tests.
Pings PowerG sensors to check signal strength and review PIR CAM images.
Shows signal strength and battery voltage for Zigbee sensors.
Tests the panel's microphones for clap or glass break detection.
Verifies Wi-Fi and cellular path connectivity to Alarm.com.
Tests the integrity of installed daughter cards in the panel.
Runs comprehensive tests on all panel processes.
Manages up to 242 user codes with different access levels.
Customizes dealer contact information displayed on the panel.
Allows editing of dealer name, email, phone, website, and tag lines.
Step-by-step instructions for connecting the panel to a Wi-Fi network.
Displays current and 4-day weather forecasts based on location.
Sets digital photos to display when the panel is not in use.
Describes the functions of buttons within the Photo Frame feature.
Configures photo frame display type, duration, effects, and nighttime mode.
Provides options for updating the panel's software via Wi-Fi or Access Point.
Enables automatic checks and downloads for new software versions.
Step-by-step instructions for safely replacing the panel's backup battery.
Displays panel information including battery, software, hardware, and cellular status.
Proper procedure for powering down the panel to prevent data corruption.
Steps to reset the panel's operating system to resolve difficulties.
Procedure for performing a hard reboot, to be used only when necessary.
Steps to resolve issues encountered during panel tests.
Compliance standards and installation requirements for residential fire and burglary systems.
Compliance standards and installation requirements for commercial burglary systems.
Regulatory compliance statements for FCC and ISED Canada.
Legal instructions regarding recycling and proper disposal of the product.
Lists key technical specifications of the IQ Panel 4, including hardware and connectivity.
To Next Page
