Johnson Controls IQ Panel 4 - Supported Power-G Sensors

Detector Type
Model
Door/Window
PG9945
UL RF/CB
, PG9307
UL RB
, PG9309, PG9312
UL CB
Door/Window - Shock Sensor
PG9935
UL CB
Dual Tech (PIR+Microwave) Motion Detector
PG9984(P)
UL CB
Glassbreak Detector
PG9922
UL CB
Heat Detector
PG9936H
UL RF
Keyfobs
PG9929, PG9939, PG9949, PG9938
UL CB
Outdoor Motion Detector
PG9902, PG9974(P), PG9994(P)
UL CB
PIR Motion Detector
PG9904(P), PG9914, PG9924, PG9862, PG9872
UL CB
PIR Motion Detectors with Camera
PG9934(P), PG9944
UL CB
Sirens
PG9901
UL RF/RB
, PG9911
UL RF/RB
Smoke Detector
PG9936
UL RF
Wireless CO Detector
PG9933
UL RF
Wireless Repeater
PG9920
UL CB
Vanishing Door/Window Contact
PG9303
UL CB
, PG9975
UL RB
PowerG Wired to Wireless Converter (Supervisory window must be set
to 200 sec when used with Fire and/or CO devices)
PG9WLSHW8
UL RFB CB
SUPPORTED POWER-G SENSORS
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 177 178
NOTE: Only the PowerG sensors marked with
UL CB
in the table above shall be used in UL/ULC Residential and Commercial Burg (UL2610/
ULC-S304 Security Level I-II) listed installations. Devices marked with
UL RB
in the table above shall be used only in UL/ULC Residential Burg
(UL1023/ULC-S304 Security Level I) listed installations. Devices marked with
UL RF
in the table above can be used in UL/ULC Residential Fire
(UL985/ULC-S545) listed installations.