1. Select “Add Sensor” (NOTE: These same fields can be edited later from the “Edit
Sensor” app)
3. Tap the field marked “Sensor DL ID” to open the keyboard. Enter
the DL code or Sensor ID on the back of the device and touch “Done”
5. Choose Sensor Type from list
10. Click “Add New” to save the information and complete the process.
7. Choose Sensor Name from the list or create a “Custom Name”
using the built in keyboard with Custom Text to Speech.
8. Choose Chime Type from list
6. Indicate Sensor Group from list
9. Indicate whether you want Voice Prompts on or off
2. Select the appropriate Source based on the frequency of device being
manually learned in
4. Use the drop down menu to select which Partition you would like
the sensor to be added to (if enabled)
To Next Page
Loading...
