Johnson Controls IQ Panel 4 - Page 104

Setting
Default
Description
Allow Master Code Z-Wave
Settings
Disabled
Allow Master User Code to access Z-Wave Settings
Allow Master Code Z-Wave
Management
Disabled
Allow Master User Code to access Z-Wave Devices (Add, Edit, Clear, Delete Failed Device,
Remove All Devices & View/Edit Associations)
Access to Automation
Enabled
When enabled it allows the ability to apply simple automated actions to lights and switches
directly from the panel
Z-Wave
Enabled
Activate or deactivate the Z-Wave radio. Please use this procedure only when the controller
(panel) is missing or inoperable
Advanced Z-Wave Settings
Disabled
When Advanced Z-Wave Settings is enabled the following new icons will appear on the Z-
Wave Devices page:
-
Continuous Add Devices: Activates an “always listening” enroll mode. Include one Z-Wave
device after another. When complete you can edit the device(s) with a custom name
-
Replace Failed Node: Allows a node that has failed to be replaced with a new device using
the same node ID
-
Manage Devices From Secondary Controllers: Allows secondary controllers to manage
devices on the network
-
Controller Shift: Shifts the primary controller from IQ Panel to another controller
-
Add/Remove Controller: This icon acts like an “Add/Remove” button when pairing the IQ
Panel into another network
Z-WAVE DEVICES
Z-WAVE SETTINGS