INSTALLER/DEALER SETTINGS
EU Event Swinger Shutdown Count
Determines the number of times a particular event will record to “EU Events” log before
shutdown. The count (3-10) will reset after and arm or disarm event. NOTE: This setting is
greyed out and not selectable unless EN Grade 2 is Enabled.
Set the Panel's language toggle to your favorite 2 languages. Choose from English
(United States), Français (Canada), Español (Estados Unidos), Italiano (Italia), Nederlands
(Nederland), Norsk bokmål (Norge), Svenska (Sverige), Íslenska (Ísland), Deutsch
(Deutschland), Magyar, (Magyarország), Dansk (Danmark), Românā (România), Portuguesa
(Portugal), Polskie (Polska), Suomalainen (Suomi), Français (France), Español (España).
Turning this setting off completely disables the “Power Button” on the right side of the
panel and all of it's functions. To re-enable this setting you must first check the box then
follow the on screen prompts to press the “Toggle" switch in the back of the panel
Manually Enable/Disable the LED Status Light on the panel.
NOTE: This setting will automatically be set to Disabled when EN Grade 2 is Enabled.
This is a global setting for all codes used on the panel and changes the input from 4 digits
to 6 digits. When enabled, a “00” will be appended to all existing 4 digit codes
Commercial Sensor and Device
Names
Enabling this features changes the sensor name vocabulary from residential naming to
commercial naming.
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 33 178
To Next Page
Loading...
