Johnson Controls JC-RTR11002-0 User Manual

JC-RTR11002-0 BACnet Router Installation Guide
Application
The BACnet
®
Router facilitates communication between
BACnet/IP and BACnet MS/TP networks to monitor and
control a wide variety of HVAC equipment, meters, fire
alarm panels, and lighting on the Building Automation
System (BAS).
Installation
Follow these guidelines when you install the BACnet
Router:
• Transport the device in the original container to
minimize vibration and shock damage to the router.
• Verify that all the parts shipped with the device are
present.
• Do not drop the device or subject it to physical shock.
Important: Do not open the BACnet Router housing
for any reason. The device has no user-serviceable
parts inside. Tamper-evident labels on the device
caution installers, service technicians, building
owners, and our RMA inspectors from unauthorized
opening or tampering of the device.
Parts included
• One JC-RTR11002-0 BACnet Router
• One JC-RTR11002-0 BACnet Router Pack Sheet
Materials and special tools needed
• A wall mounting requires three M4 (#8) fasteners
appropriate for the mounting surface.
• A DIN rail mounting requires one 19.0 cm (7.5 in.)
or longer piece of 35 mm (1 1/8 in.) DIN rail and
appropriate hardware.
Device diagram
Figure 1: BACnet Router device diagram
Callout Description
1 Reset button. See Reset button.
2 Recovery button. See Recovery button.
3 Supply power adapter connection: 24 VDC
barrel jack. See Power supply.
4 Supply power removable terminal block: gray
terminals, 24 VAC, Class 2. See Power supply.
5 FC bus port: RJ-12 6-pin modular jack. The
RJ-12 jack is a future enhancement.
6 FC Bus removable terminal block for FC
BUS-1: blue terminal. See FC bus terminal
blocks.
7 End-of-line (EOL) switch for FC BUS-1. See
Setting end-of-line switches.
8 USB-1 and USB-2 ports are future
enhancements.
9 Micro-USB port is a future enhancement.
10 One Ethernet port, 100/10 Mbps, 8-pin RJ-45
connector. See Ethernet port.
11 Multi-color LED status indicators. See LED
status indicators.
LIT-12014229
Release 13.0
2023-10-04
JC-RTR11002-0

Johnson Controls JC-RTR11002-0 Specifications

General

Brand	Johnson Controls
Model	JC-RTR11002-0
Category	Network Router
Language	English