What to do if my Johnson Controls LE4050M is not receiving events?
To resolve issues receiving events on your Johnson Controls Cell Phone, first, check that the communicator is connected to the network. Next, verify that the PC link cable is properly connected, referring to the communicator wiring sections. Also, ensure that the DSC PowerSeries/PowerSeries Neo alarm panel is correctly programmed.
How to fix the LED when it's off on my Johnson Controls LE4050M?
If the LED on your Johnson Controls Cell Phone is off, it could be due to several reasons. First, the unit might not be properly connected to the panel. In this case, verify the wiring, referring to the wiring diagram. Second, there might be no power from the panel; measure the AUX output of the panel to check this. Lastly, the unit itself could be damaged, requiring a replacement.
Why is my Johnson Controls LE4050M constantly ON, blinking every 5 seconds?
If your Johnson Controls Cell Phone is constantly ON, blinking every 5 seconds, it means a connection has been established but at a low signal level. Try repositioning the antenna to improve the signal strength.
What does slow flashing mean on my Johnson Controls Cell Phone and how to fix it?
If your Johnson Controls Cell Phone is showing a slow flashing, it indicates that there is no signal available. Repositioning the antenna might solve this problem.
What does it mean when the LED is constantly on on my Johnson Controls Cell Phone?
When the Johnson Controls Cell Phone's LED is constantly on, it indicates that a connection has been established at a good signal level.
General| Brand | Johnson Controls |
|---|---|
| Model | LE4050M |
| Category | Cell Phone |
| Language | English |
Compliance details for FCC and ISED Canada, including antenna gain.
Guidelines for safe operation, handling, and installation of the device.
Contact details for technical assistance and support for the device.
Highlights the primary functions and capabilities of the LE4050M communicator.
Provides detailed technical parameters, including module, bands, EIRP, and protocols.
Lists all items included in the LE4050M package, such as cables and antenna.
Instructions for configuring the alarm panel for the communicator.
Steps for programming the DSC PowerSeries alarm panel for the communicator.
Explains the meaning of different LED states for the communicator.
Provides solutions for common issues encountered with the device.
Guides on adding monitoring channels and new devices via the installer portal.
Specific instructions for registering the device using the mobile application.
Details items not covered by warranty and provides legal disclaimers.
Outlines the procedure and costs for servicing products outside the warranty period.
To Next Page