Johnson Controls MAP 1810 User Manual

ENGLISH - Quick Start Guide
Gateway in the Mobile Access Portal Gateway Network
and IT Guidance Technical Bulletin (LIT-12012015) for
more information.
4
Log in to the MAP Gateway
Use the default Admin login credentials.
Read and accept the MAP Gateway license agreement.
5
Change Passwords
The rst time you log in to the MAP Gateway, the
Change Password and Passphrase web page appears.
You must change the Admin password and Wi-Fi
passphrase.
IMPORTANT: After you change the Wi-Fi passphrase
or SSID, the web server restarts and you must
rejoin the MAP Gateway Wi-Fi network using the new
passphrase. On some mobile devices, you must select
and “forget” the original MAP Gateway Wi-Fi network
before rejoining the network with the new passphrase.
a. Replace the default password in the New Admin
Password eld. Conrm the change by entering the
new password in the Verify New Admin Password
eld.
b. Replace the Wi-Fi Passphrase in the New Wi-Fi
Passphrase eld and click Save.
6
Optional - Ethernet Setup
IMPORTANT: The MAP Gateway must be plugged
into external power for Ethernet use. Get approval
from the site’s IT Administrator before connecting to
the Ethernet network.
a. In the MAP Gateway UI, navigate to Settings >
Ethernet.
b. In the Ethernet drop-down list, select On to enable the
MAP Gateway Ethernet port.
c. Click Save on the bottom of the screen.
d. Note the address in the IP Address eld. By default,

Johnson Controls MAP 1810 Specifications

General

Brand	Johnson Controls
Model	MAP 1810
Category	Gateway
Language	English