542937-UUM-B-0212
Johnson Controls Unitary Products 13
TEMPERATURE OVERRIDE
Programmable Mode
Advanced Programmable Mode
Quick Heat / Quick Cool
1. Press Thermometer icon.
2. Select Quick Heat / Quick Cool icon – runs heat/cool equipment at maximum capacity for 10
minutes.
1. Press temperature adjustment arrows either
up or down until the desired override tempera-
ture setpoint is shown.
2. Press Pick Duration button.
3. Select the duration for running the temperature
override.
a. Until Cancelled – holds temperature until
cancelled.
b. Until specific Date & Time – holds tempera-
ture until specified date and time.
c. Until program schedule Next Event – hold
temperature until next schedule event.
1. Press Thermometer icon.
2. Use the slider to set the desired override tem-
perature.
3. Press Pick Duration button.
4. Select the duration for running the temperature
override.
a. Until Cancelled – holds temperature until
cancelled.
b. Until specific Date & Time – holds tempera-
ture until specified date and time.
c. Until program schedule Next Event – hold
temperature until next schedule event.
To Next Page
Loading...
