Johnson Level & Tool 40-6526 User Manual

©2011 Johnson Level & Tool 19
Detecting Laser Level Signals
While detecting laser signals, the LCD will display as follows: (take
the set-up state of high sound and fine detection as an example)
When the laser signal is near the on-grade mark, the displayed up
and down arrows will decrease as the distance to the on-grade
mark decreases.
1. When detecting a horizontal laser signal, it is important
to have the bubble vial centered, as the deflection of
the receiver will influence its receiving accuracy.
Laser signal
The laser signal is down
Sound: rapid short beeps
Laser signal
The laser signal is up
Sound: slow short beeps
Laser signal
Horizontal bar indicated on-grade
Sound: continuous sound
No laser signal is detected
Sound: no sound
Laser signal Laser signal Laser signal Laser signal
4411H-English_Manuals 3/11/11 1:13 PM Page 19

Johnson Level & Tool 40-6526 Specifications

General

Brand	Johnson Level & Tool
Model	40-6526
Category	Laser Level
Language	English