Johnson J30MLSRC

When "n" follows a value on the meter face, the
procedure
is measuring resistance. n is the sym-
bol for ohm , the unit of measurement for resis-
tance.
DR4205
Values
When "-::;," precedes a value on the meter face, it
indicates your reading must be less than, or equal
to, the value shown.
~O.3n
Q) ad
DR4206
INTRODUCTION
SYMBOLS
When "2" precedes a value on the meter face, it
indicates your reading must be greater than, or
equal to, the value shown.
2::0.30
Q) ad
DR4207
15
E
o
U
Qj
)(
~
Qj
~
ii
E