Johnston VT801 - Safety Notice

Chapter - Johnston Visual Module
Page Issue 02
OG
5:2
V Range 501 ● 651 ● 801 - Operator’s Guide
DO NOT
● Disconnect the battery within 15 seconds of operating the ignition key to the off
position.
ALWAYS
●
 Disconnect the vehicle battery and all the CANbus nodes when working on the
electrical system or when carrying out any welding on the vehicle. Failure to observe
this can cause damage to the nodes.
● Removeignitionkeywhenworkingonthevehicle.Ensureallpersonnelareclearof
the vehicle before restarting engine.
Safety Notice
All Copyright and rights are the property of Johnston Sweepers Ltd