32 33
5 - Re-thread the shoulder straps through the correct slots on the
front of the child restraint.
6 - Ensure the harness straps pass under the cross bars.
7 - Once you’ve adjusted the shoulder straps to the desired
height, re-attach BOTH shoulder strap loops into the metal
splitter plate.
Check the Final Fit:
Have your child sit back in the child restraint and repeat
Step 1 - Check Harness Height Fit to ensure the harness is snug
and positioned correctly at or just below their shoulders.
Adjusting Harness Height: (cont.)
WARNING: Make sure shoulder straps are not twisted
before attaching to the splitter plate.
5
7
6
To Next Page
Loading...
