34 35
1 inch (2.5 cm)
1
2
Securing Child in Seat:
1 - The top of child’s head must be at least 1 inch (2.5 cm) below
top of child restraint.
2 - Loosen the harness straps by pressing the harness adjustment
button (1) and pulling on the straps (2).
3 - Press the button to release the halves of the chest clip and
separate chest clip.
4 - Press the button and remove the buckle tongues from the buckle
and spread harness straps apart. Place your child in the child restraint.
1 2
3 4
5
IMPORTANT: Child must be in a seated position against both
the back and bottom of the seat with no gap behind the child.
Do not allow child to slouch.
Harness straps must be at or just below child’s shoulders to
avoid injury.
5 - Gently guide child’s arms through the shoulder straps. Insert
the buckle tongues into the buckle. Listen for click. Pull on the
buckle to make sure it is properly latched.
6 - Snap the chest clip together and temporarily slide towards the
buckle for tightening the harness straps.
(Securing Child in Seat continued on PG. 36)
6
To Next Page
Loading...
