EasyManuals Logo

Joie signature i-Spin XL User Manual

Joie signature i-Spin XL
161 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
24 25
Using in the booster mode
(Child height 100cm-150cm/Child weight
36kg/3.5 - 12 years old)
see images
33
-
42
! Install the enhanced child restraint on the rear vehicle seat, and then
place the child in the enhanced child restraint.
! Remove the infant insert when booster mode.
! Fold the load leg into the compartment underneath the base; slide
the lock button to ensure the load leg stays in place.
34
&
35
Securing Child
1. Unlock the buckle of the harnesses by pressing the red button.
36
2. Remove the crotch belt cover and keep it properly.
37
3. Tuck the crotch strap, shoulder strap with covers away in the
compartments.
38
&
39
&
40
4. Adjust the headrest so the bottom of the headrest is level with the
child's shoulders.
5. Buckle up with the vehicle belt.
! Shoulder belt must pass through shoulder belt guide.
42
-1
! The colors of the indicators on both ISOFIX attachments connectors
should be completely green.
see images
43
-
52
Press the red button to disengage the buckle.
43
Follow steps
44
-
52
to detach soft goods.
To re-attach the soft goods please repeat the above steps in the
reverse order.
Detach Soft Goods
! Please store the infant insert somewhere out of the child’s reach.
! Please wash the soft goods with cold water under 30°C.
! Do not iron the soft goods.
! Do not bleach or dry clean the soft goods.
! Do not use undiluted detergents gasoline or other organic solvent to
wash the enhanced child restraint or base. It may cause damage to
the enhanced child restraint.
! Do not twist the soft goods to dry with great force. It may leave the
soft goods with wrinkles.
! Please hang dry the soft goods in the shade.
! Please remove the enhanced child restraint from the vehicle seat if it
will not be in use for a long period of time.
Care and Maintenance
! The ISOFIX connectors must be attached and locked onto the
ISOFIX anchor points.
32
-1
! The load leg must be installed correctly with green indicator.
32
-2
! Always keep child secured in harness and properly tightened by
removing any slack.
! DO NOT use forward facing mode until your child's height is at least
76cm AND 15 months old.
! The installation with ISOFIX connectors in booster mode is optional.
If ISOFIX connectors are used, make sure the indicator colors on
both connectors are completely green when attached to the anchor
points.
42
! The enhanced child restraint can not be used if the vehicle safety
belt buckle (female buckle end) is too long to anchor the enhanced
child restraint securely.
42
-2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Joie signature i-Spin XL and is the answer not in the manual?

Joie signature i-Spin XL Specifications

General IconGeneral
BrandJoie
Modelsignature i-Spin XL
CategoryCar Seat
LanguageEnglish

Related product manuals