2
1.Power ON/OFF
Hold the Power button for 3s to turn ON/OFF the device. In the
state of power ON, short press the “Power ON/OFF” Button to
turn off the screen light
Basic operation
2.Charge the Player
Plug the attached USB cable into the USB port of a computer to
charge the player. When you start charging, it will show two
options: “Charge & Transfer” and “Charge & Play”. An indicate
on the top right will show the charging statue.
Noted:Use only the 5V/500mA charger for charging or it may lead
to product failure.
3.Date Transfer
Plug it into your computer and copy over media files with the
attached USB cable as if it was a flash driver or use music
management software such as Windows Media Player to transfer
the files.(Not supported for iTune)
Note: if your computer cannot detect the MP3 Player, try to update
your USB driver or use another cable. If it still can’t work for you.
Ask JOLIKE Customer Service for additional help. (See Cover)
4.Return
While on playing interface, press the button to exit.
5.Volume Adjustment
Use the Volume Control button on the right to adjust the volume.
Note: There’s a built-in speaker in the MP3 Player, the speaker
will turn on automatically when no earphones are plugged in.
6.Headphones and Speaker
JOLIKE MP3 Player only support Headphones with impedance
16Ωor 32Ω. Built-in Speaker could be turn OFF, see “Settings”.
To Next Page
Loading...
