PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT
THERE IS LED 9-WATT BULB IN THE BOX
.
Step 1 Step2 Step3
Make sure all parts could be aligned before assemble Insert the Harp (H) into the Saddle (F). Put the light on a level surface to check
Do not rotate lamp body too hard avoid base screw broken Put the shade(J) on the Harp(H), then if everything is stable.
Pull cord through lamp base(A) to tighten stem connections, tighten the Finial (K) into the Harp (H)
Screw the tube (B) onto the base (A) Insert the bulb(I) into the socket(G).
Screw the tube (C) onto the tube (B)
Screw the part (D) onto the tube(C)
Screw the part (E,F,G) onto the tube(D)
Hang the short string(S)in the out ring of(E)
Hang the long string(R)in the inner ring of(E)
ENJOY YOUR LAMP
To Previous Page
Loading...
Need help?
General
