PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT
THERE IS LED 9-WATT BULB IN THE BOX
Step 1 Step 2 Step 3
Make sure all parts could be aligned before assemble Put the harp (C)into the lamp body(B),and tighten Put the light on a level surface to check
Do not rotate lamp body too hard avoid base screw broken with ring(D) if everything is stable.
Screw the Lamp body (B1) onto the Lamp body(B2 Insert the bulb(E) into lamp body(B)
Screw the Lamp body (B2) onto the Lamp body(B3) Put the nipple(F) into harp(C)
Screw the Lamp body (B3) onto the Lamp body(B4) Put the shade(G) into the nipple(F), tighten with finial(H)
Screw the lamp body(B3) onto the lamp base(A)
ENJOY YOUR LAMP
To Previous Page
Loading...
Need help?
General
