PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT
THERE IS LED 9-WATT BULB IN THE BOX
E
Step 1 Step 2
then put the Shade( C ) on the socket(B) Put the light on a level surface to check
Screw the Socket loop(D) onto the Socket(B) if everything is stable.
Insert the bulb(E) into the socket(B).
ENJOY YOUR LAMP
To Previous Page
Loading...
Need help?
General
