Step 1 Step 2 Step 3
Make sure all parts could be aligned before assemble Insert the Harp (E) into the Saddle (C). Put the light on a level surface to check
Do not rotate lamp body too hard avoid base screw broken Put the shade(F) on the Harp (E), then if everything is stable.
Screw the Saddle(C) and socket (D) onto the Lamp body(B3) tighten the Finial (G)into the Harp (E)
Screw the Lamp body (B3) onto the Lamp body(B2) Insert the bulb(H) into the socket(D).
Screw the Lamp body (B2) onto the Lamp body(B1)
Screw the Lamp body (B1) onto the Lamp base(A)
Be careful not to twist the power cord and tighten securely
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT,
THERE IS LED 9-WATT BULB IN THE BOX .
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
To Previous Page
Loading...