42/69
Document 10000028013-DOC-000-00-EN
we know what‘s cooking
Program 14 (Only with the additional equipment for chilling)
This program starts the heating function and stirrer. When the required temperature has been reached,
the temperature set point, heating power, stirring pattern and RPM are altered. After the required period
of time, the temperature set point, heating power, stirring pattern and RPM are altered again. After a pe-
riod of time, chilling to a temperature set point is started. When this temperature has been reached, the
chilling function and the stirrer are continues and the beeper is activated.This could be used, for exam-
ple, for heating up, cooking followed by warm-keeping and chilling.
Program 15 (Only with the additional equipment for chilling)
14 Activate beeper
Step Action Parameter
1 Switch to heating mode
2 Set the set point for food temperature and heating
power
P02.1 Food temperature
P02.2 Heating power
3 Switch on heating
4 Set stirring pattern and stirring RPM
Switch on the stirrer
P04.1 Stirring pattern
P04.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped..
5 Pause until the set point for food temperature has
been reached
6 Set the set point for food temperature and heating
power
P06.1 Food temperature
P06.2 Heating power
7 Set stirring pattern and stirring RPM
Switch on the stirrer
P07.1 Stirring pattern
P07.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped..
8 Pause for required time P08.1 Time
9 Set the set point for food temperature and heating
power
P09.1 Food temperature
P09.2 Heating power
10 Set stirring pattern and stirring RPM
Switch on the stirrer
P010.1 Stirring pattern
P010.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped..
11 Pause for required time P11.1 Time
12 Switch to chilling mode
13 Set the set point for food temperature and chilling
power
P13.1 Food temperature
P13.2 Køletrin
14 Switch on chilling
15 Set stirring pattern and stirring RPM
Switch on the stirrer
P12.1 Stirring pattern
P12.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped..
16 Pause until the set point for food temperature has
been reached
17 Activate beeper
To Next Page
Loading...
