EasyManua.ls Logo

Joni MultiMix - Page 56

Default Icon
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
we know what‘s cooking
55/69
Document 10000028013-DOC-000-00-EN
User menu
The user can set this group of parameters to optimise the operation of the kettle to suit his or her needs.
The user menu is activated by switching off the kettle by pressing and then pressing and si-
multaneously and holding them down for 5 seconds.
With the AutoTemp 32, 36, and 56 controllers, the current menu item is shown in the temperature display,
while the water display shows the current value. The value is set using the arrow keys and saved by
pressing water- .
56.0 Select lid type 0 = separate lid/hinged lid without
switch
1 = Hinged lid with switch
60.1 Select safety factor for maximum opening time of
solenoid valve
2.0 - 5.0
1.0 corresponds to 12 litres/minute
through the valve.
60.2 Select whether a water flow meter has been fit-
ted
0 = No
1 = Yes
70.0 Select the method for tilting the kettle 0 = No tilt
1 = Electric tilt (actuator)
2 = Hydraulic tilt
80.0 Select whether temperature corrections are to
be altered
0 = No
1 = Yes
Select 1 if 80.1 - 80.6 are to be
shown.
80.1 Select correction for Yescket temperature at 10°
Celsius/50° Fahrenheit
Celsius: -5.0 - +5.0
Fahrenheit: -9.0 - +9.0
80.2 Select correction for Yescket temperature at
100° Celsius/212° Fahrenheit
Celsius: -5.0 - +5.0
Fahrenheit: -9.0 - +9.0
80.5 Select correction for food temperature at 10°
Celsius/50° Fahrenheit
Celsius: -5.0 - +5.0
Fahrenheit: -9.0 - +9.0
80.6 Select correction for food temperature at 100°
Celsius/212° Fahrenheit
Celsius: -5.0 - +5.0
Fahrenheit: -9.0 - +9.0
85.0 Select chilling type 0 = No chilling/manual chilling
1 = Automatic chilling without recircu-
lation of water
2 = Automatic chilling with recircula-
tion of coolant.
90.1 Select stirrer gearing factor (1:X) 10.0 - 50.0
This parameter must have the value
specified in ‘Factory data’.
90.2 Select the maximum RPM for the stirrer 50-155
This parameter must not be set high-
er than specified in ‘Factory data’
90.1 Select whether the kettle is fitted with Foot pedal 0 = No
1 = Yes
91.0 Select whether the kettle is fitted with SlowMix 0 = No
1 = Yes

Related product manuals