Normal procedures and recommended speeds
Winch Launch procedures
Winch launching is performed using the CG hook in front of the main
wheel.
With a slow-accelerating winch, good aileron control is achieved using
flap 3. With a gentle to strong headwind flap 4 may be used from the
start.
Allow the aircraft to get airborne in the 2-point position (main wheel and
tail wheel just touching). As the speed builds up, gently rotate into the full
climbing attitude. Change to flap setting 4 when the aircraft is established
in the full climbing attitude.
Table 4.5-1 Winch launch speed table
To release, pull the yellow release handle all the way.
To Next Page
Loading...
Need help?
General
