Jonker Sailplanes JS-MD 3 - User Manual

Defines standard safety terminology used in the manual.

Lists critical airspeeds and their significance.

Explains airspeed indicator color codes and markings.

Details mass limitations for the aircraft.

Defines allowable CG ranges for different configurations.

Specifies maximum load factors for maneuvers.

Specifies required equipment for operation.

Procedure for jettisoning the canopy.

Procedure for abandoning the aircraft.

Describes stall characteristics and recovery steps.

Details the procedure for recovering from a spin.

Procedure for recovering from a spiral dive.

Procedure for recovering from excessive sideslip.

Procedure for handling electrical fires.

Covers specific emergency situations and procedures.

Procedure for emergency landing with gear retracted.

Advises on handling flight in icing conditions.

Procedure for emergency landing on water.

Essential checks before flight for airworthiness.

Checklist for pre-flight inspections.

Details recommended speeds for winch launching.

Details recommended speeds for aerotow launching.

Prohibits flight in lightning conditions.

Describes approach procedures and flap settings.

Describes the correct landing attitude and brake activation.

Lists entry speeds and G-loads for aerobatic maneuvers.

Provides stall speeds for different configurations.

Summarizes weight and balance calculations.

Defines CG envelope based on mass and CG ranges.

Procedure to set the CG for optimum performance.

Outlines airworthiness inspection schedules and personnel qualifications.