Jonsered CS 2188 - English; Table of Contents; Contents

CONTENTS
4 – English
Contents
KEY TO SYMBOLS
Symbols on the machine: ...................................... 2
Symbols in the operator’s manual: ........................ 2
CONTENTS
Contents ............................................................... 4
INTR ODUCTION
Dear customer! ..................................................... 5
WHA T IS WHAT?
What is what on the chain sa w? ........................... 6
GENERAL SAFETY PRECA UTIONS
Bef ore using a new chain saw .............................. 7
Important .............................................................. 8
Always use common sense .................................. 8
Personal protective equipment ............................. 8
Machine ′ s safety equipment ................................. 9
Cutting equipment ................................................. 12
ASSEMBL Y
Fitting the bar and chain ....................................... 18
FUEL HANDLING
Fuel ....................................................................... 19
ST ARTING AND STOPPING
Star ting and stopping ............................................ 21
W ORKING TECHNIQUES
Bef ore use: ............................................................ 23
General working instructions ................................ 23
How to avoid kickback ........................................... 30
MAINTENANCE
Carb uretor adjustment .......................................... 31
Checking, maintaining and servicing chain saw
safety equipment ..................................................
32
Muffler ................................................................... 34
Starter ................................................................... 35
Air filter .................................................................. 36
Spark plug ............................................................. 37
Lubricating the bar tip sprocket ............................. 37
Needle bearing lubrication .................................... 37
Adjustment of the oil pump ................................... 37
Cooling system ..................................................... 38
Centrifugal cleaning “Turbo” .................................. 38
Winter use ............................................................. 38
Maintenance schedule .......................................... 39
TECHNICAL D ATA
T echnical data ....................................................... 40
Bar and chain combinations ................................. 44
Saw chain filing and file gauges ........................... 41
FEDERAL EMISSION CONTR OL WARRANTY
STATEMENT
Y OUR WARRANTY RIGHTS AND OBLIGATIONS 42
AMERICAN ST ANDARD SAFETY
PRECAUTIONS
Saf ety precautions for chain saw users ................ 43