Jonsered CS 2234 User Manual

CONTENTS
En
g
lish – 7
1154232-26 Rev.4 2012-02-13
What is what on the chain saw?
(1)
1 Information and warning decal
2 Cylinder cover
3 Air purge
4 Starter handle
5 Choke control/Start throttle lock
6 Stop switch (Ignition on/off switch.)
7 Rear handle
8 Fuel tank
9 Adjuster screws carburettor
10 Starter
11 Chain oil tank
12 Product and serial number plate
13 Throttle lockout (Prevents accidental operation of
throttle control.)
14 Front handle
15 Front hand guard
16 Muffler
17 Bar
18 Bar tip sprocket
19 Chain
20 Spike bumper
21 Chain catcher
22
Chain tensioning screw
23 Clutch cover
24 Rear handle with right hand guard
25 Throttle control
26 Operator ′ s manual
27 Combination spanner
28 Bar guard
Contents
INTRODUCTION
Dear Customer, ..................................................... 6
Symbols on the machine: ...................................... 6
What is what on the chain saw? ........................... 7
CONTENTS
Contents ................................................................ 7
GENERAL SAFETY PRECAUTIONS
Before using a new chain saw .............................. 8
Important ............................................................... 8
Always use common sense .................................. 8
Personal protective equipment .............................. 9
Machine ′ s safety equipment ................................. 9
Cutting equipment ................................................. 11
ASSEMBLY
Fitting the bar and chain ....................................... 14
FUEL HANDLING
Fuel ....................................................................... 14
Fuelling ................................................................. 15
Fuel safety ............................................................ 15
STARTING AND STOPPING
Starting and stopping ............................................ 16
WORKING TECHNIQUES
Before use: ............................................................ 17
General working instructions ................................ 17
How to avoid kickback ........................................... 20
MAINTENANCE
General ................................................................. 21
Carburettor adjustment ......................................... 21
Checking, maintaining and servicing chain saw
safety equipment ................................................... 21
Muffler ................................................................... 22
Air filter .................................................................. 22
Spark plug ............................................................. 22
Maintenance schedule .......................................... 23
TECHNICAL DATA
Technical data ....................................................... 24
Bar and chain combinations .................................. 25
EC-declaration of conformity ................................. 25

Jonsered CS 2234 Specifications

General

Weight	4.7 kg
Oil Tank Volume	0.2 l
Chain Pitch	3/8"
Fuel Tank Volume	0.3 liters
Chain Gauge	0.05 in